Welcome to the Viper 5706V manual‚ your comprehensive guide to installing‚ operating‚ and troubleshooting this advanced vehicle security system. This manual ensures safe and effective use of all features‚ including remote start‚ SmartStart‚ and silent arming modes‚ while maximizing system performance and security.
1.1 Overview of the Viper 5706V System
The Viper 5706V is a cutting-edge vehicle security and remote start system designed for advanced protection and convenience. It features a user-friendly interface‚ priority controls‚ and innovative technologies like SmartStart and silent arming. With its robust security capabilities and seamless integration‚ the Viper 5706V offers reliable performance‚ ensuring your vehicle is protected and easily controlled from a distance.
1.2 Importance of Reading the Manual
Reading the Viper 5706V manual is essential to understand its features‚ proper installation‚ and troubleshooting. It ensures safe and effective use‚ helping you maximize the system’s potential. The manual provides clear instructions for setup‚ operation‚ and resolving common issues‚ guaranteeing optimal performance and security for your vehicle. Familiarizing yourself with the guide prevents errors and enhances your overall experience with the system.
Installation Guide for the Viper 5706V
This section provides a detailed‚ step-by-step guide for installing the Viper 5706V system‚ including wiring diagrams and sensor setup to ensure a smooth and proper installation process.
2.1 Step-by-Step Installation Process
Begin by disconnecting the vehicle’s battery to ensure safety. Mount the Viper 5706V brain under the dashboard and secure it. Install sensors‚ such as the shock sensor‚ in appropriate locations. Use the wiring diagram to connect the system to the car’s ignition‚ starter‚ and alarm wires. Connect the remote start‚ siren‚ and other accessories according to the manual. Once all wires are connected‚ reconnect the battery and test the system to ensure proper functionality.
2.2 Wiring Diagram and Connections
Refer to the provided wiring diagram for precise connections. Connect the ignition wire to the vehicle’s ignition circuit and the starter wire to the starter solenoid. Ensure the siren wire is linked to the siren and the remote start wire to the remote start module. Connect the negative wire to a reliable ground source. Double-check all connections for accuracy to prevent system malfunctions. Follow the diagram closely for proper installation. Test the system post-connection to confirm functionality.
Features of the Viper 5706V
The Viper 5706V offers advanced features like silent mode‚ siren-less arming‚ and a user-friendly interface. It includes SmartStart‚ timer start‚ and runtime reset for enhanced convenience and control.
3.1 Priority User Interface and Controls
The Viper 5706V features a user-friendly interface designed for easy navigation. The Responder LC3 remote control includes priority icons and clear text for intuitive operation. Controls such as SmartStart‚ Timer Start‚ and Runtime Reset provide efficient system management. Silent Mode and TempCheck further enhance usability‚ ensuring a seamless experience. This interface prioritizes essential functions‚ making it simple to access and control key security and convenience features.
3.2 SmartStart‚ Timer Start‚ and Runtime Reset
The Viper 5706V offers advanced features like SmartStart for remote vehicle starting‚ Timer Start for scheduling starts‚ and Runtime Reset to adjust session lengths. These functions ensure convenience and control. SmartStart allows seamless integration with your smartphone‚ while Timer Start enables preset activation. Runtime Reset adapts to changing conditions‚ optimizing performance. Together‚ these features enhance usability and provide a tailored experience for vehicle security and comfort.
3.4 Silent Mode and Siren-Less Arming
Silent Mode allows you to arm or disarm your vehicle without triggering the siren‚ ideal for quiet environments. Siren-Less Arming disables the siren during arming or alarming events‚ reducing noise disturbances. These features enhance flexibility and discretion‚ ensuring your system adapts to various situations while maintaining security. Enable Silent Mode through the Responder LC3 remote or settings menu for a stealthy‚ user-friendly experience tailored to your needs and preferences.
Advanced Features and Settings
Discover the Viper 5706V’s cutting-edge features‚ including Responder LC3 remote control‚ vehicle pairing options‚ and customizable settings for enhanced security and user convenience‚ ensuring seamless system integration.
4.1 Responder LC3 Remote Control
The Responder LC3 remote control offers advanced features for commanding and monitoring your vehicle. With priority icons and clear text‚ it simplifies operation. Pairing the remote involves opening a door‚ turning the ignition to RUN‚ and following on-screen instructions. This ensures secure communication between the remote and your Viper 5706V system‚ providing reliable control over remote start‚ arming‚ and disarming functions.
4.2 Vehicle Setup for Pairing
Vehicle setup for pairing involves opening at least one door and turning the ignition to the RUN position. Ensure the system is disarmed before starting. Follow the on-screen instructions to complete the pairing process. Proper setup ensures seamless communication between your Viper 5706V system and remote control‚ enabling full functionality of remote start and security features.
Troubleshooting Common Issues
Identify and resolve common problems with your Viper 5706V system‚ including manual mode errors‚ remote start sequence issues‚ and system diagnostics for optimal performance and reliability.
5.1 Manual Mode Errors and Solutions
Common manual mode errors include “MTS mode not enabled” or “Alarm triggered during remote start.” To resolve these‚ ensure the system is properly synced with your vehicle and check wiring connections. For remote start issues‚ verify the ignition settings and consult the diagnostic menu. Resetting the system or reprogramming the remote may also resolve errors. Always refer to the troubleshooting section for detailed solutions and ensure the system is updated to the latest firmware version.
5.2 Remote Start Sequence Problems
Common issues with the remote start sequence include the vehicle not starting or the process stopping abruptly. Check if the ignition is in the correct position and ensure all doors are closed. Verify the remote’s battery strength and signal range. If issues persist‚ review the wiring connections and consult the diagnostic menu for error codes. Resetting the system or reprogramming the remote may resolve the problem. Ensure proper vehicle setup for pairing as outlined in the manual.
Maintenance and Upkeep
Regular maintenance ensures optimal performance of your Viper 5706V system. Adjust sensors‚ reset virtual tach‚ and check wiring connections periodically. Test remote functionality and update settings as needed. Perform system diagnostics to identify and resolve potential issues promptly‚ ensuring reliable operation and security of your vehicle.
6.1 Adjusting Sensors and Settings
To ensure optimal performance‚ adjust the sensors and settings according to your vehicle’s specifics. Begin by disarming the system and turning off the ignition. Locate the trim pot on the sensor and adjust it as needed for accurate triggering. Refer to the manual for specific instructions tailored to your setup. After adjustments‚ test the system to confirm proper functionality and sensitivity.
6.2 Resetting Virtual Tach and System Diagnostics
To reset the Virtual Tach‚ enter the Remote Pairing section and press the Control button four times. For system diagnostics‚ access the diagnostic mode to check system status and error codes. Ensure all sensors and connections are functioning properly for accurate readings. Regular diagnostics help maintain optimal performance and security of your Viper 5706V system.
By following this guide‚ you’ve successfully understood the Viper 5706V’s operation‚ features‚ and troubleshooting. Regular maintenance and proper use ensure optimal performance and vehicle security.
7.1 Final Tips for Maximizing System Performance
Regularly check and adjust sensors for optimal accuracy. Use SmartStart and Timer Start features wisely to enhance convenience. Reset Virtual Tach and run system diagnostics periodically to maintain performance. Ensure firmware is updated for the latest improvements. Refer to the manual for detailed instructions on these procedures to keep your Viper 5706V functioning at its best.
Additional Resources
Access the full Viper 5706V Instruction Manual online for detailed guides and troubleshooting. Visit the official Directed website for support‚ FAQs‚ and downloadable resources to enhance your system experience.
8.1 Downloading the Full Instruction Manual
The full Viper 5706V instruction manual is available for download as a PDF from trusted sources like ManualsLib or Directed’s official website. It provides detailed installation steps‚ feature explanations‚ and troubleshooting guides. Ensure you download the correct 25-page manual for comprehensive system understanding and proper setup. This resource is essential for maximizing your system’s performance and resolving any operational issues effectively.
8.2 Accessing Online Support and Guides
For additional assistance‚ visit Directed’s official website or support portal for Viper 5706V resources. Explore FAQs‚ video tutorials‚ and user forums to address specific questions or technical challenges. Online support ensures you stay updated with the latest features‚ troubleshooting tips‚ and system enhancements‚ helping you maintain optimal performance and security for your vehicle.
Warranty and Support Information
Your Viper 5706V system is backed by a comprehensive warranty. For support‚ contact Directed Customer Service or visit their official website for online resources and assistance.
9.1 Understanding Your Warranty Coverage
Your Viper 5706V system is backed by a limited warranty from Directed‚ covering defects in materials and workmanship for one year from the purchase date. Warranty coverage includes parts and labor‚ provided the system was installed by an authorized dealer. Damage due to misuse‚ improper installation‚ or external factors is not covered. For full details‚ refer to the warranty section in the manual or contact Directed customer support.
9.2 Contacting Directed Customer Service
For assistance with your Viper 5706V system‚ contact Directed Customer Service at 1-800-421-1908 or visit their official website for support options. You can also email their technical support team for troubleshooting or general inquiries. Ensure you have your system details ready for faster resolution. Directed’s customer service is available Monday through Friday‚ 8 AM to 5 PM PST‚ to address any questions or concerns about your Viper 5706V system.